Stability-indicating RP-HPLC method development and validation for determination of nine impurities in apixaban tablet dosage forms. Robustness study by quality by design approach

A quality by design (QbD) based high-resolution HPLC method is described for determination of impurities in apixaban (APX) in the tablet dosage form. Employing a simple and stability-indicating HPLC method, nine known impurities were quantified with good peak resolution. Mobile phase A (MP-A) was prepared with buffer and acetonitrile 90:10 v/v, while mobile phase B (MP-B) contained water and acetonitrile 10:90 v/v. The gradient program was 0 min, MP-A 75%, B 25%; 20 min, MP-A 65%, B 35%; 30 min, MP-A 40%, B 60%; 40min, MP-A 40%, B 60%; 42 min, MP-A 75%, B 25%; and 50 min, MP-A 75%, B 25%. The chromatographic separation was achieved using a Zorbax RX C₁₈ 250 × 4.6 mm column, 5 μm (1.0 ml min⁻¹, 280 nm, 50 μl) and a column temperature of 40°C. Several separation studies were carried out using design of experiments to optimize the method. Validation results confirm the applicability of the developed method for quality analysis and stability studies of the regular product on the manufacturing stream.     

Polymerization kinetic pathways of epoxidized linseed oil with aliphatic bio-based dicarboxylic acids

The curing of epoxidized linseed oil (ELO) with three different bio-based dicarboxylic acids (sebacic acid, suberic acid, and succinic acid) has been investigated. No accelerators or catalysts were used and the resulting thermosets are 100% bio-based. Structural investigations of the three crosslinked ELO resins were made using FTIR spectroscopy and TMA, that is, tensile tests, TGA, and DMA. As evidenced by FTIR measurements ELO and dicarboxylic acids reacts but no major differences can be distinguished between the dicarboxylic acids. Non-isothermal curing has been conducted by rheological and DSC measurements. Advanced isoconversional analysis applied to DSC data in association with the complex viscosity variations gives new insights into the polymerization mechanism. The length of dicarboxylic acid carbon chain modifies the reaction rate. Then, a correlation between reaction rate, activation energy, pre-exponential factors, polymerization mechanism, and change in rate-limiting step was shown. DMA and tensile tests highlight the relationship between the carbon chain length, reactivity, and thermomechanical properties. The use of succinic acid allows reaching a higher T_g and thermal stability.     

Generating Excess Protons in Microsolvated Acid Clusters under Ambient Conditions: An Issue of Configurational Entropy versus Internal Energy

Acid dissociation, and thus liberation of excess protons in small water droplets, impacts on diverse fields such as interstellar, atmospheric or environmental chemistry. At cryogenic temperatures below 1 K, it is now well established that as few as four water molecules suffice to dissociate the generic strong acid HCl, yet temperature-driven recombination sets in simply upon heating that cluster. Here, the fundamental question is posed of how many more water molecules are required to stabilize a hydrated excess proton at room temperature. Ab initio path integral simulations disclose that not five, but six water molecules are needed at 300 K to allow for HCl dissociation independently from nuclear quantum effects. In order to provide the molecular underpinnings of these observations, the classical and quantum free energy profiles were decomposed along the dissociation coordinate in terms of the corresponding internal energy and entropy profiles. What decides in the end about acid dissociation, and thus ion pair formation, in a specific microsolvated water cluster at room temperature is found to be a fierce competition between classical configurational entropy and internal energy, where the former stabilizes the undissociated state whereas the latter favors dissociation. It is expected that these are generic findings with broad implications on acid–base chemistry depending on temperature in small water assemblies.     

基于Matlab GUI的微观化学反应过程可视化设计

Based on the quasi-classical trajectory (QCT) method and Matlab GUI technology, we developed a program code for visualizing the collision process of the elementary chemical reactions of the a + bc type. The general methodology of QCT, abstraction of dynamical properties of molecular collisions and the making of Graphical User Interface are introduced. The running results of an application to the reaction F + HCl→HF + Cl is also presented. The results showed that this program could vividly demonstrate the behavior and final state of the atom-diatom collision process in animated form. Students can interact with internal MATLAB code through graphical user interface, observe the reactive behavior and final results in real-time from multiple angles, which helps students to understand the complex reaction mechanism and deepen their perceptual impression of the chemical process at a microscopic atomic/molecular level.     

Precipitated droplets in-situ cross-linking polymerization and its applications

A novel, green and effective approach to fabricate uniform functional spherical polymer particles remains a huge challenge. Herein, we present a novel one-pot approach superior to traditional precipitation polymerization, called precipitated droplets in-situ cross-linking (PDIC) polymerization, by which uniform particles are fabricated on large scale without any toxic organic solvents or stabilizers. With this approach, functional spherical polymer particles can be fabricated continuously only relying on gravity, and the preparation process is thus super-fast. For example, polyacrylic acid (PAA) hydrogel particles with ultra-high adsorption capacity are fabricated within only 60 s. Moreover, we have successfully fabricated different functional hydrogel particles, including anticoagulant, reinforced and bactericidal particles, based on the monomers of 2-acrylamide-2-methylpropanesulfonic acid (AMPS), acrylamide (AM) and [2-(methacryloyloxy)ethyl]trimethylammonium chloride (DMC), respectively. This approach has several advantages: (i) the technology is green; (ii) the size and porosity of the particles can be well-controlled; (iii) various functional spherical hydrogel particles can be fabricated by using corresponding monomers. More importantly, this approach fits the commercialization of functional hydrogel particles on demand.     

Facile synthesis,characterization, and decolorization activity of Mn2+ and Al3+ co-doped hexagonal-like ZnO nanostructures as photocatalysts

A good photocatalyst with high efficiency can be synthesized easily using eco-friendly materials and processes. Our synthesized samples exhibit all of the aforementioned features. In this work, manganese co-doped ZnO at different weight percentages (3, 6, 9, and 15 wt.%) with and without 1.5 wt.% aluminum was synthesized by hydrothermal method, and their photocatalytic activity in aqueous solutions of methyl orange (MO) was investigated under visible light. The structural and optical properties of the samples were characterized using X-ray powder diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, and diffuse reflectance spectroscopy. In this work, Mn²⁺ ions in the 9%Mn/ZnO sample and Mn²⁺, Al³⁺ ions in the (9%Mn, 1.5%Al)/ZnO sample calcined at 800 °C were replaced instead with some Zn²⁺ ions in hexagonal wurtzite structures of ZnO. These structures were found next to each other in the form of a hexagonal shape that created 3D-hexagonal-like ZnO nanostructures. Finally, nanoparticles (NPs) and nano hexagonal-like ZnO nanostructures were, respectively, dispersed on the surface of 3D-hexagonal-like structure of 9%Mn/ZnO and (9%Mn, 1.5%Al)/ZnO. Diffuse reflectance spectroscopy analysis showed that the (9%Mn, 1.5%Al)/ZnO sample had more light absorption than 9%Mn/ZnO. However, contrary to our expectations, the 9%Mn/ZnO sample had better decolorization efficiency (94%) after 60 min under visible light, which could be attributed to a significant increase in the level of recombination by the aluminum ions.     

Experimental and theoretical studies of Mn(II) and Co(II) metal complexes of a tridentate Schiff's base ligand and their biological activities

We have used the condensation method to synthesize 2-acetyl-5-methylsemicarbazone ligand. Manganese(II) and Cobalt(II) complexes having formula [ML₂]X₂ were synthesized where M = Mn(II) and Co(II), L = ligand, X = Cl⁻, CH₃COO⁻, NO₃⁻, ½SO₄²⁻. The characterization data suggests the octahedral geometry for all the synthesized complexes. Tridentate nature of the 2-acetyl-5-methylsemicarbazone ligand was revealed by IR studies. Molar conductance analysis suggested the electrolytic nature of the complexes. The theoretical study includes geometrical optimization, HOMO-LUMO energy gap, energetic parameters and dipole moment. These results also confirmed the tridentate nature of the ligand and the octahedral geometry of complexes. The molecular electrostatic potential (MEP) study suggested the reactive sites for an electrophilic or nucleophilic attack in the ligand. We tested the synthesized compounds for their antifungal and antibacterial action via well diffusion method and found that parent ligand after the coordination with the metal ion showed more effective inhibition against bacteria and fungi.     

非齐次动力学方程的一种精细积分单步方法

针对非齐次动力学方程■,结合精细积分法和微分求积法,利用同阶的显式龙格-库塔法对计算过程中待求的v_(k+i/s)(i=1,2,…,s)进行预估,提出了一种避免状态矩阵求逆的高效精细积分单步方法。该方法采用精细积分法计算e~(Ht),而Duhamel积分项采用s级s阶的时域微分求积法,计算格式统一且易于编程,可灵活实现变阶变步长。仿真结果表明,与其他单步法及预估校正-辛时间子域法进行数值比较,该方法具有高精度、高效率及良好的稳定性,在求解大规模动力系统时间响应问题中具有较大的优势。     

形状记忆合金椭圆孔口问题的有限单元法

基于Lagoudas形状记忆合金(SMA)三维本构模型,假设材料为各向同性,推导了SMA平面应力状态的增量型本构方程,继而编写了ABAQUS用户自定义材料(UMAT)子程序,研究了在双向拉伸情况下,外载荷、温度、椭圆孔口长短轴之比对超弹性SMA椭圆孔口板中应力诱发马氏体相变区的影响。数值结果表明:应力诱发马氏体相变首先发生在椭圆孔口长轴端点部位,在外加载荷作用下逐渐扩展到板内,并由内向外形成马氏体相区、相变混合区和奥氏体相区;SMA板内应力诱发马氏体完全相变区面积与施加外载荷成正相关,与温度成负相关;随着椭圆孔口长短轴之比增大,SMA板内应力诱发马氏体完全相变区面积呈现出先减小后增大的趋势;拉应力差值相同时,相较于拉应力沿椭圆孔口长轴方向较大的情况,当拉应力沿椭圆孔口短轴方向较大时,SMA板内完全相变区面积较大,椭圆孔口周边应力集中现象更明显。     

基于图像的二维剪纸自动生成方法

中国剪纸的设计极具挑战性, 要求画面简洁、直观, 还需要表达特定的文化内涵, 且整张剪纸须整体连通。提出了一种基于图像的二维剪纸自动生成方法, 能够将任意数码照片自动转化为剪纸图形。首先，利用图像分割方法建立区域连接图; 接着, 基于该连接图对颜色、边界对比度和区域连通性进行数学建模, 并获得优化目标函数; 最后, 通过模拟退火算法求解目标方程, 自动生成保持图像内容的剪纸图形。还开发了连通性后处理和区域指定等用户交互工具, 允许用户在自动生成的剪纸图形中方便地加入个人设计。实验表明, 所生成的剪纸图形画面简洁、整体连通。 本方法在降低剪纸设计难度的同时还可满足个性化的设计需求, 有助于传播和传承我国的民间剪纸艺术。